How To Update BIOS on Windows 10 [Step-By-Step Guide]

Here Is Indepth Guide On How To Update Motherboard Bios On Windows 10. A Complete Guide On Flash Bios, Upgrade And Install Guide 2020.

How To Update BIOS on Windows 10 [Step-By-Step Guide]

As a PC user, the term BIOS is one you should at least be vaguely familiar with. It's quite possible that some of you must have already encountered some hardware issues that would have necessitated a BIOS upgrade. 

The BIOS system usually comes integrated with the motherboard of your PC and it receives updates directly from the manufacturer.

Sometimes, updating your system BIOS can be a tricky affair especially since any interruption in the process could result in more damages that might prove difficult to resolve.

In this post, we will be providing you with useful tips on how to update BIOS on Windows 10 for HP, ASUS, Acer, Lenovo, Dell, and other foremost PC models.

If you are new to our site you should definitely go through these windows 10 guides also.

But first, a preamble: 

About the Windows BIOS

The Basic Input Output System (BIOS) can best be described as a software tool that comes pre-installed in your computer’s motherboard.

The BIOS is very crucial to the functionality and performance of your Windows 7/8/10 computer as it was developed to provide a communication interface between the PC hardware and the software (OS).

Without the BIOS chip attached and configured to your PC motherboard, it would be impossible for you to even turn ON your computer.

How Important is the Windows 10 BIOS Update?

Generally, you don't have to update your Windows BIOS if your computer is working well. However, it does require minor interval updates.

Some major issues that may necessitate a BIOS update include slow startup for Windows, system crashes, motherboard issues, and more.

BIOS updates typically come in small sizes. They can provide support features for a new CPU or graphics card model or even fix a system bug. You most likely won’t notice any differences after updating your BIOS. 

How to Update BIOS on Windows 10 

So you want to learn how to update BIOS on Windows 10?! Follow the simple steps we’ve described here:

  • Start by pressing the Win+R keyboard keys to launch the Run Command prompt.
  • Next, you can type out ‘msinfo32’ inside the space provided in the Run command box and then click OK or press Enter. You will then be redirected to the Windows System Information page for your computer. 

  • Once there, you should look out for the BIOS Version/Date option. It should be listed under the System Summary section. 

  • You should now take note of your BIOS version for later use.
    Note that you’ll have to take note of the motherboard model if your PC was assembled.
  • This next step will involve you visiting the official manufacturer’s website for your PC to locate & download the updated version of your BIOS.

You will likely find it under the website section for Download or Support Services. You can then proceed to browse for the supported updates by supplying the BIOS keyword along with the model number of your PC.
Alternatively, you could simply perform a random Google search using the brand and model name of your computer as well as the motherboard name, BIOS name, and model number. You can then check out the top 5 websites from among the search results.

  • Once you have downloaded the right BIOS update file, you can go ahead and launch or unzip the program so that it can run on your system.
  • Next, insert a USB flash drive, a pen drive, or any other type of external storage into port 2.0 of your machine.
  • This next step will involve you copying the entire unzipped file collection from your PC into the USB drive.
  • Afterward, keep the external drive inserted while you restart your PC. Hold on for a few seconds and then, press the F2, F4, F8, F10, or F11 keyboard keys while still on the Windows restart screen. You will then be redirected to the BIOS mode screen.

Note that the functional keyboard keys for switching to the BIOS mode differ across computer models. The F4 key is however the most widely used.

  • Navigate to the Boot section where you can enable any Flash.
  • Next, click on the Start Flash in Advance button to perform the BIOS update process by following the on-screen instructions.

That’s it! You’ve just learned how to update BIOS on Windows 10.

We strongly recommend that you create a system restore point to backup your current settings before going ahead with the Windows 10 BIOS update.

List of Official Windows 10 Websites Where You Can Download BIOS Updates

Next up on our guide on how to update BIOS on Windows 10, is a list of reliable service providers. 

Other Things You Should Know About Updating Windows 10 BIOS

Looks like you’ve finally decided to learn how to update BIOS on Windows 10?! There are one or two things you must be aware of:

  • Always ensure that your PC is charging before going ahead with the BIOS update process.
  • Always use a virus-free USB device and ensure that it was formatted successfully before BIOS update files are backed up on it.
  • If you’re unsure of which function keys on your keyboard will allow you to switch to the BIOS mode, you can simply run a random Google search for the BIOS keyboard keys along with the model number of your computer.
  • Do not be alarmed if your computer should restart automatically while the Windows 10 BIOS update is ongoing as it is a normal part of the process.
  • You must never tamper with the system settings for your BIOS as this may result in unexpected program failure.
  • You must always download BIOS from the manufacturer’s official website to avoid exposing your device to virus or malware attacks. 

How to Check the BIOS Version for Your System

It’s not very difficult to figure out the BIOS version for your Windows 7/8/10 OS. There are even multiple ways to do so.

Here’s how:

1. Using Commands to Check Your Windows BIOS Version

  • Start by pressing the Win+X+A or Win+X+C keyboard keys to launch the Command Prompt.
  • Afterward, type out the following command within the space provided in the box: “wmic bios get smbiosbiosversion”.

  • Next, hit Enter and you will get to see your system’s BIOS version details in the search result.
  • Likewise, you can type out the following command if you wish to view your system’s entire BIOS info: “wmic bios get biosversion”. 

2. Accessing the System Information Panel through the Run Box to Check Your Windows BIOS Version

  • You can start by right-clicking on the Windows Start icon>Run to launch the Run command prompt.
  • Next, type out the following command “msinfo32” within the space provided on the Run box. 

While on the new window that opens, scroll down the page and look out for the BIOS Version/Date details. You’ll find it under the Items tab.

This is where you’ll find the BIOS value for your system.

Rounding Up

That’s it for our guide on how to update BIOS on Windows 10.

Feel free to add this web page to your bookmarks for more handy Windows 7/8/10 user info.